Everything You Need to Know About Water Pressure Problems | Tips from Your Trusted Tomball, TX Plumbing Service Provider

Photo By curtoicurto at istock

There are a lot of things that can go wrong with your plumbing system, and none of them are pleasant. One of the worst feelings is having a lack of water pressure in your Tomball, TX, home that leaves you feeling like you're not quite getting clean in the shower or removing all the gunk from your dishes. Fortunately, there are ways to solve that problem with the help of a plumbing service. If you don't feel like you're getting enough water pressure in an individual fixture or all throughout your home, here's everything you need to know.

Pin It Down

One of the first things you need to consider if you're trying to figure out why you have low water pressure is where the problem is actually occurring. Often times, a low water pressure problem will be confined to one room or fixture in your home, which can be a big hint when it comes to finding a solution.

When you call a plumbing service to take a look at the pipes and fixtures in your Tomball, TX, home, make sure they know whether the water pressure problem is occurring throughout the home or confined to a single area. This will help your plumber get to the bottom of the problem quicker so you don't have to deal with low water pressure for quite as long.

Pipes and Water Pressure

The fact of the matter is, poor water pressure can be caused by problems in various parts of your plumbing system. The most common cause of poor water pressure is a part of the plumbing system through which water can't easily flow. If you want to get your water pressure back to normal, it's generally as simple as having a plumbing service locate and knock out whatever is blocking up part of the system.

In a lot of cases, your poor water pressure is going to be caused by a pipe that's old and has a lot of buildup in it. While the water flows smoothly through the rest of your plumbing system, this pipe slows things down a lot and has a serious effect on water pressure. In most cases, the only way to fix a problem like this is to have a plumbing service replace the problem pipes in your plumbing system.

Having problem pipes that cause low water pressure is a double-edged sword. On one hand, it's a tough problem to have because having entire sections of pipe replaced can be a big job. Repair costs would likely be much lower if there was a small problem with a fixture in your home. The good news, however, is that it's fairly easy to determine when a pipe is causing a water pressure problem, so you can be confident that a plumbing service will get the problem fixed.

Fixture Problems

If you've only got low water pressure in one sink or another fixture in your home, chances are the problem is stemming from the fixture itself. One of the easiest ways to determine this is to try all the sinks in your home. If you've got identical sinks in two bathrooms and one is providing far better water pressure, there's something wrong with the other sink.

The good news about fixture problems is that they aren't always major. While there are cases where a plumbing service may need to install an entirely new faucet, your problem could be as simple as a clogged aerator that's not letting water flow through properly.

Water Demand

Every home is different when it comes to water use. While some households may do fine with a single modest water heater, others may need a larger, more efficient water heater or even a second water heater. When it comes to the water pressure in your home, the amount of water your home can supply vs. the demand for that water plays a big role.

Water enters your home through a main line, which then sends the water through various pipes to get it to the fixtures and appliances that need it. This is an effective system as long as you've got enough water flowing through your main line to supply the other lines. If you've got a lot of people living in your house or you happen to use a lot of water, that increased demand can cause a lot of plumbing service problems, including low water pressure.

The Valves

While there are a lot of fairly large problems that can cause low water pressure, there are lots of smaller ones, too. If you've got low water pressure in your home, make sure you have a plumbing service check all the little things before doing costly work like installing fixtures or replacing pipe.

As dumb as it may sound, the poor water pressure in your home could be caused by a valve that's partially closed. There are two valves that can reduce the water supply to your home, and they may have been closed and reopened during your last plumbing service call. The good news is, this is the simplest way to get your water pressure back to normal, so this problem is ideal. Next time you have a plumbing service professional come to your home to do work, have them take a look at the valves to make sure they're fully opened.

The Easy Way Out

Taking good care of your plumbing system is crucial if you like having a plumbing system that works. Unfortunately, it can also be a bit overwhelming without the help of a good professional.

If you need a plumbing professional to get your water pressure sorted out or fix another problem, you can count on the folks at bluefrog Plumbing + Drain of Northwest Houston. No matter what kind of plumbing problem you've got in your Tomball, TX, home, you can give bluefrog Plumbing + Drain of Northwest Houston a call today to get it sorted out.